PE-103 wax powder

Used for water-based, solvent based, solvent-free, UV resistant coatings, inks, and powder coatings (including co solvents) to improve surface smoothness, wear resistance, and scratch resistance.

Product Information

Chemical composition

Modified polyethylene wax

Typical physicochemical data

The data provided on this data page is only typical values and not technical indicators of the product.

Melting point:  100±5℃

Particle size:   D50:7μm  D90:13μm

Supply form:   Micronized powder

Storage and transportation

Storage in cool,dry or well-ventilated place

Application

Liquid coating and ink

Product features and advantages

This additive can increase surface smoothness, improve scratch resistance, and enhance coating adhesion resistance in water-based and solvent based paint inks.

Recommended usage

Waterborne varnish, water-based and solvent based printing inks, UV coatings

Recommended dosage

0.3-3%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

This product can be dispersed in coatings and inks through high-speed stirring or grinding, and can also be prepared into wax slurry and added.

Powder coating

Features and advantages

This additive can increase surface smoothness, improve scratch resistance, and enhance coating adhesion resistance in water-based and solvent based paint inks.

Recommended dosage

0.3-2%additive dosage based on the total formula,due to different formulations and technological conditions,it is recommended to test before use determine the best amount of addition.

Adding method and processing guidance

It is recommended to add this product during the premixing of the base material and then squeeze it out completely. It can also be added to the sheet material, mixed well, ground and sieved together, or added to the finished powder, mixed well and sieved.